Space Saving Vacuum Ejector ZQ Series (ZQ105/ZQ107/ZQ110) – Bộ Tạo Chân Không SMC

Product Description

Easy-to-use vacuum pressure switch.
[Features]
・ Improved operability with push button type
・ Vacuum pressure switch with LED display function
・ Up to 10 units can be copied simultaneously
・ The setting value of the master side (copy source) sensor can be copied to the slave side sensor
・ Reduction of setting labor-hours
・ Reduces setting value input errors

Danh mục: Vacuum Generators - Vacuum Ejectors SMC - Bộ Tạo Chân Không SMC

Mô tả

Download

Space Saving Vacuum Ejector ZQ Series Specifications – Bộ Tạo Chân Không SMC

Space Saving Vacuum Ejector ZQ Series external appearance 1

Space Saving Vacuum Ejector ZQ Series external appearance 2

Ejector Specifications

Model		ZQ105	ZQ107	ZQ110
Nozzle Diameter (mm)		0.5	0.7	1.0
Maximum Suction Flow Rate L/min (ANR)		5	10	22
Air Consumption L/min (ANR)		14	23	46
Maximum Vacuum Pressure		-80 kPa
Supply Pressure Range	Air Pressure Supply (P) Port	0.3 to 0.5 MPa (For normally open type: 0.3 to 0.45 MPa)
Supply Pressure Range	Release Pressure Supply (PD) Port	0.3 to 0.5 MPa (For normally open type: 0.3 to 0.45 MPa) And PD pressure ≥ P pressure
Standard Supply Pressure ^Note:		0.35 MPa	0.43 MPa
Operating Temperature Range		5 to 50°C
Usable Fluids		Air

Note: The maximum suction flow rate was obtained at the standard supply pressure.

Product Weight

With suction filter (single unit): 95 g (*1)
With vacuum pressure switch + suction filter (single unit): 109 g (*2)
End plate assembly for manifold: 122 g

*1 Includes 0.3-m connector for supply valve and release valve.
*2 Includes a 0.3‑m connector for supply valve and release valve and a 2‑m connector for vacuum pressure switch.

Manifold Type Weight Calculation

(Unit weight) × number of stations + (weight of end plate assembly for manifold)
Example: Eight stations with a vacuum pressure switch and suction filter
109 g × 8 + 122 g = 994 g

Product Supply And Release Valves

Type		Normally Closed Type		Latching Type	Normally Open Type
Type		Standard Type (1 W)	Low Wattage Type (0.5 W)	Latching Type	Normally Open Type
Model (Refer to the section on ordering solenoid valves on p. 107)		VQ110-□	VQ110Y-□	VQ110L-□ VQ110N-□	ZQ1-VQ120-□
Manual Operation		Non-locking push type / locking type (tool required)		Push-lock type	Non-locking push type / locking type (tool required)
Coil Rated Voltage		12/24 V DC, 100/110/200/220 V AC	12/24 V DC	12/24 V DC, 100/110/200/220 V AC	12/24 V DC
Power Consumption (Current Value)	DC	1 W	0.5 W	1 W
	AC 100 V	0.5 VA (5 mA)	–	0.6 VA (6 mA)	–
	110 V AC	0.55 VA (5 mA)	–	0.65 VA (5.9 m)	–
	200 V AC	1.0 VA (5 mA)	–	1.2 VA (6 mA)	–
	220 V AC	1.1 VA (5 mA)	–	1.3 VA (5.9 mA)	–
Electrical Entry		Grommet, L-type plug connector (with light / surge voltage suppressor)		L-type plug connector (With light / surge voltage suppressor)	Grommet, L-type plug connector (With light / surge voltage suppressor)

Vacuum Pressure Switch Specifications

Model			ZQ1-ZSE (ZSE10)	ZQ1-ZSE (ZSE10F)
Rated Pressure Range			0 to -101 kPa	-100 to 100 kPa
Set Pressure Range / Display Pressure Range			10 to -105 kPa	-105 to 105 kPa
Withstand Pressure			500 kPa
Minimum Setting Unit			0.1 kPa
Power Supply Voltage			12 to 24 V DC ±10%, ripple (p-p) 10% or less (with power supply polarity protection)
Current Consumption			40 mA or less
Switch Output	–		NPN or PNP open collector 2 outputs (selectable)
	Maximum Load Current		80 mA
	Maximum Applied Voltage		28 V (with NPN output)
	Residual Voltage		2 V or less (with load current of 80 mA)
	Response Time		2.5 ms or less (with anti-chattering function: 20, 100, 500, 1,000, 2,000 ms selectable)
	Short Circuit Protection		Equipped
Repeatability			±0.2% F.S. ±1 digit
Hysteresis	Hysteresis Mode		Variable from 0 ^{Note 1:}
Hysteresis	Window Comparator Mode		Variable from 0 ^{Note 1:}
Analog Output	Voltage Output	Output Voltage (Rated Pressure Range)	1 to 5 V ±2.5% F.S.
		Linearity	±1% F.S. or less
		Output Impedance	Approx. 1 k Ω
Display System			3 1/2-digit, 7-segment LED, 1 color display (red)
Display Accuracy			±2% F.S. ±1 digit (with ambient temperature of 25°C ±3°C)
Operation Indicator Light			Lights when ON, OUT1: green, OUT2: red
Environmental Resistance	Enclosure		IP40
	Operating Humidity Range		Operating/stored: 35 to 85% RH (no condensation)
	Withstand Voltage		1,000 V AC for 1 min. between live parts and housing
	Insulation Resistance		50 MΩ or more (500 V DC measured with megohmmeter) between live parts and housing
Temperature Characteristics			±2% F.S. (at 25°C of operating temperature range: -5 to +50°C)
Lead Wires			Oil-resistant cabtire cord Conductor cross-sectional area: 0.15 mm² (AWG26), 5 cores, 2 m, insulator outer diameter: 1.0 mm

Note 1: If the applied voltage fluctuates around the set value, the hysteresis must be set to a value more than the width of the fluctuations or chattering will occur.
Note 2: For specifications not listed, ejector specifications apply.

XT534-5-001-AS
ZQ1L-1-BSB-AS
ZQ1R-1-BSB-AS
ZQ-3-009-10AS
ZQ-SAE
ZQ-STB02
ZQ-STB03
ZQ-STB04
ZQ-STB05
ZQ-STB06
ZQ-STB07
ZQ-STB08
ZQ1-VQ120-5G
ZQ1-VQ120-5L
ZQ1-VQ120-5LB
ZQ1-VQ120-5LO
ZQ1-VQ120-5LOB
ZQ1-ZSEA-0-A
ZQ1-ZSEA-1-A
ZQ1-ZSEA-2-A
ZQ1-ZSEA-3-A
ZQ1-ZSEA-4-A
ZQ1-ZSEA-5-A
ZQ1-ZSEAG-0-A
ZQ1-ZSEAG-2-A
ZQ1-ZSEAG-3-A
ZQ1-ZSEAG-4-A
ZQ1-ZSEAGK-0-A
ZQ1-ZSEAGK-3-A
ZQ1-ZSEAK-2-A

ZQ1051U-J1Y5L-D32C-22
ZQ1051U-J1Y5L-EAG-00
ZQ1051U-J1Y5L-EAG-33
ZQ1051U-J1Y5L-EAG-55
ZQ1051U-J1Y5L-EBMG-33
ZQ1051U-J1Y5L-F
ZQ1051U-J1Y5L-F-55
ZQ1051U-J1Y5L-FC-55
ZQ1051U-J1Y5L-FK-55
ZQ1051U-J1Y5LB-D31CL
ZQ1051U-J1Y5LO-EBMG-30-Q
ZQ1051U-J1Y5LO-EBMG-33
ZQ1051U-J1Y5LO-EBMG-33-Q
ZQ1051U-J1Y5LO-F
ZQ1051U-J1Y5LOB-F
ZQ1051U-J1Y6L-EAG-55
ZQ1051U-J11L-EAG-33
ZQ1071U-J1Y5L-EAG-00
ZQ1071U-J1Y5L-F
ZQ1071U-J1Y5L-F-00-Q
ZQ1071U-J1Y5L-F-22
ZQ1071U-J1Y5L-F-33
ZQ1071U-J1Y5L-FK
ZQ1071U-J1Y5LO-F
ZQ1071U-J1Y5LOB-F
ZQ1071U-J11L-F
ZQ1071U-J11L-F-23
ZQ1071U-J12L-EA-00
ZQ1071U-J12L-FCMG-23
ZQ1071U-J15G-F
ZQ1071U-J15L-D31C-33
ZQ1071U-J15L-D32C

ZQ1101U-J1Y5L-EAMG-00
ZQ1101U-J1Y5L-EAMG-33-N
ZQ1101U-J1Y5L-F
ZQ1101U-J1Y5L-F-33
ZQ1101U-J1Y5L-F-33-N
ZQ1101U-J1Y5L-F-53
ZQ1101U-J1Y5LB-F-23
ZQ1101U-J1Y5LO-D31CL
ZQ1101U-J1Y5LO-EAMG-00
ZQ1101U-J1Y5LO-ECGK-00
ZQ1101U-J1Y5LO-ECMG-53
ZQ1101U-J1Y5LO-ECMGK-00
ZZQ-SAE
ZZQ101-BSB
ZZQ101-BSC
ZZQ102-BSB
ZZQ102-BSC
ZZQ103-BSB
ZZQ103-BSC
ZZQ104-BSB
ZZQ104-BSC
ZZQ105-BSB
ZZQ105-BSC
ZZQ106-BSB
ZZQ106-BSC
ZZQ107-BSB
ZZQ107-BSC

Liên Hệ Medin Co., Ltd

Công ty TNHH Mễ Đình được thành lập từ năm 2006.
Từ đó đến nay Medin luôn là Công ty dẫn đầu về lĩnh vực Tự Động Hoá ở thị trường trong và ngoài nước với hơn 1,000 khách hàng, cùng với rất nhiều dự án lớn nhỏ cho các nhà máy sản xuất.
Chúng tôi cung cấp cho khách hàng những giải phát tuyệt vời nhất trong việc ứng dụng Tự Động Hoá vào sản xuất
Phương châm: “Giải pháp của chúng tôi, lợi ích của khách hàng”
Giá trị cốt lõi: “Uy tín là sự tồn tại của chúng tôi”

Hơn 20 năm kinh nghiệm, chúng tôi có đội ngũ kỹ sư nhiều kinh nghiệm, có khả năng tư vấn, đưa ra giải pháp có lợi nhất cho khách hàng.
Sự tin tưởng và đồng hành của khách hàng là động lực để Medin phát triển cao hơn và xa hơn.

👉 Công ty 𝐌𝐞𝐝𝐢𝐧 hỗ trợ:
𝑇𝑢̛ 𝑣𝑎̂́𝑛 𝑔𝑖𝑎̉𝑖 𝑝ℎ𝑎́𝑝 𝑡𝑜̂́𝑖 𝑢̛𝑢
𝐶𝑜́ 𝑠𝑎̆̃𝑛 𝑠𝑎̉𝑛 𝑝ℎ𝑎̂̉𝑚 𝑑𝑢̀𝑛𝑔 𝑡ℎ𝑢̛̉
𝐻𝑜̂̃ 𝑡𝑟𝑜̛̣ 𝑡𝑒𝑠𝑡 𝑡𝑎̣̂𝑛 𝑛𝑜̛𝑖