Compact Slide MXH Series – Xi Lanh Khí Nén SMC
Product Description
– Xi Lanh Khí Nén SMC
A compact slide that realizes high rigidity by employing a circulation type of new linear guide.
[Features]
· Improved allowable moment.
· Reduced weight thanks to an upgraded piston part.
Download
Compact Slide MXH, features – Xi Lanh Khí Nén SMC
Allowable moment improved by up to 2x
Employs a highly rigid, new linear guide.
Improved allowable moment
*Moment due to static load (the above is a comparison with the conventional product, MXH6).
High allowable moment
Pitch moment / yaw moment / roll moment
Reduced weight thanks to a highly rigid, new linear guide and an updated piston part
19% weight reduction (ø20-10 (inner diameter 20 to 10 mm) stroke)
Fully compatible mounting
External dimensions, workpiece mounting dimensions and cylinder mounting dimensions are the same as the conventional product; mounting is possible from 4 directions.
- Horizontal mounting type (body through hole)
- Horizontal mounting type (body screw)
- Vertical mounting type (body screw)
- Vertical mounting type (body screw)
Piping is possible from 3 directions
OUT port (2 locations on both sides) / IN port (2 locations on both sides)
Series variation
Series variation correspondence table
Application examples
Supports cases in which the distance to the workpiece is long, etc.
Specifications
Display symbol
Rubber cushion
| Tube inner diameter (mm) | 6 | 10 | 16 | 20 |
|---|---|---|---|---|
| Usable fluids | Air | |||
| Operation Method | Double-acting type | |||
| Piping connection port diameter | M5 × 0.8 | |||
| Minimum operating pressure | 0.15 MPa | 0.06 MPa | 0.05 MPa | |
| Maximum operating pressure | 0.7 MPa | |||
| Guaranteed pressure resistance | 1.05 MPa | |||
| Ambient temperature and working fluid temperature | No auto switch: -10 to 70°C (however, no freezing) With auto switch: -10 to 60°C (however, no freezing) |
|||
| Operating piston speed | 50 to 500 mm/s | |||
| Allowable kinetic energy J | 0.0125 | 0.025 | 0.05 | 0.1 |
| Lubrication | Lubrication-free | |||
| Cushion | Rubber cushions on both sides | |||
| Allowable difference of stroke length | 0 to +1.0 | |||
Basic Information
| Type | L-Shaped Table Type | Table Material | Aluminum Alloy | Environment | General Purpose |
|---|---|---|---|---|---|
| Table Surface Treatment | Hard Anodize | Guide Type | Linear guide type | Port Screw Type | M screw |
| Cushion | Rubber cushions on both sides |
MXH6-10Z
MXH6-15Z
MXH6-30Z
MXH10-10Z
MXH10-20Z
MXH10-40Z
