5-Port Solenoid Valve Body Ported Single Unit SY7000 Series – Van Điện Từ SMC

Product Description

– Van Điện Từ SMC

SMC Solenoid Valve.
[Features]
· Power consumption: 0.1 W (with power saving circuit)

Danh mục: Solenoid Valves SMC - Van Điện Từ SMC

Mô tả

Download

5-Port Solenoid Valve, Body Ported Single Unit, SY7000 Series Specifications – Van Điện Từ SMC

Series		SY7000
Usable Fluids		Air
Internal Pilot Operating Pressure Range MPa	2-position single	0.15 to 0.7
	2-position double	0.1 to 0.7
	3 Position	0.2 to 0.7
Ambient and fluid temperature (°C)		-10 to 50 (no freezing)
Maximum operating frequency (Hz)	2 Position Single, Double	5
Maximum operating frequency (Hz)	3 Position	3
Manual Operation		Non-locking push type, push-turn locking type screwdriver-operated type, push-turn locking manual-operation type
Pilot Exhaust Method		Main valve, pilot valve common exhaust type
Lubrication		Not required
Mounting Orientation		Free
^*Impact resistance/Vibration-resistance (m/s²)		150/30
Enclosure		Dust-proof (*DIN terminal and M8 connector are IP65)

*Based on IEC60529.
*Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)

Solenoid Specifications

Electrical Entry			Grommet (G) (H) DIN terminal (D) (Y) L-type plug connector (L) M8 connector (W) M-type plug connector (M)
Electrical Entry			G, H, L, M, W	D, Y
Coil rated voltage (V)	DC		24, 12, 6, 5, 3	24, 12
Coil rated voltage (V)	AC 50/60 Hz		100, 110, 200, 220
Allowable Voltage Fluctuation			±10% of rated voltage*
Power Consumption W	DC	Standard	0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)]
Power Consumption W	DC	With power saving circuit	0.1 (only with light) * [Startup 0.4, holding 0.1]
*Apparent power (VA)	AC	100 V	0.78 (with light: 0.81)	0.78 (with light: 0.87)
		110 V 115 V	0.86 (with light: 0.89) [0.94 (with indicator light: 0.97)]	0.86 (with light: 0.97) [0.94 (with light: 1.07)]
		200 V	1.18 (with light: 1.22)	1.15 (with light: 1.30)
		220 V [230 V]	1.30 (with light: 1.34) [1.42 (with light: 1.46)]	1.27 (with light: 1.46) [1.39 (with light: 1.60)]
Surge Voltage Suppressor			Diode (varistor for DIN terminal and non-polar type are )
Indicator Light			LED (neon bulb for DIN terminal AC)

*The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
*Energy-saving circuit not available with DIN terminal / M8 connector.
For details, see the SMC catalog.

Response Time

*Standard type based on JIS B8419:2010 dynamic performance testing (Coil temperature 20°C, at rated voltage)

Switching Method	Response Time ms (at 0.5 MPa)
	Without light or surge voltage suppressor	With light and surge voltage suppressor
	Without light or surge voltage suppressor	S, Z type	R, U type
2-position single	31 or less	38 or less	33 or less
2-position double	27 or less	30 or less	28 or less
3 Position	50 or less	56 or less	50 or less

Flow Rate Characteristics / Weight Table

Valve Model Numbers	Switching Method		Piping connection port diameter		Flow Rate Characteristics						Weight g
			1, 5, 3 (P, EA, EB)	4, 2 (A, B)	1 → 4/2 (P → A/B)			4/2 → 5/3 (A/B → EA/EB)			Grommet	L, M plug connector	DIN terminal	W M8 connector
			1, 5, 3 (P, EA, EB)	4, 2 (A, B)	C (dm³ / [s·bar])	b	Cv	C (dm³ / [s·bar])	b	Cv	Grommet	L, M plug connector	DIN terminal	W M8 connector
SY7□20-□-02	2 Position	Single	1 (P) port 1/4 5, 3 (EA, EB) port 1/8	1/4	4.1	0.23	0.93	3.3	0.33	0.81	101	104	125	108
	2 Position	Double			4.1	0.23	0.93	3.3	0.33	0.81	120	125	167	133
	3 Position	Closed Center			2.9	0.31	0.70	2.4	0.38	0.63	128	133	175	141
		Exhaust Center			2.5	0.39	0.65	3.4 [2.1]	0.35 [0.38]	0.82 [0.54]
		Pressure Center			4.3 [2.4]	0.23 [0.32]	0.97 [0.61]	2.2	0.39	0.58
SY7□20-□-C8	2 Position	Single		C8 (ø8 [diameter 8 mm] single-action fitting)	3.2	0.26	0.77	3.2	0.37	0.82	107	110	131	114
	2 Position	Double			3.2	0.26	0.77	3.2	0.37	0.82	126	132	174	140
	3 Position	Closed Center			2.6	0.24	0.63	2.4	0.31	0.62	134	140	182	148
		Exhaust Center			2.4	0.25	0.57	2.6 [1.9]	0.42 [0.46]	0.70 [0.56]
		Pressure Center			3.3 [2.4]	0.28 [0.22]	0.78 [0.57]	2.2	0.34	0.60
SY7□20-□-C10	2 Position	Single		C10 (ø10 (diameter 10 mm) single-action fitting)	3.8	0.26	0.86	3.2	0.34	0.82	103	105	126	109
	2 Position	Double			3.8	0.26	0.86	3.2	0.34	0.82	122	127	169	135
	3 Position	Closed Center			2.8	0.27	0.67	2.4	0.21	0.59	130	135	177	143
		Exhaust Center			2.5	0.25	0.59	2.7 [2.0]	0.38 [0.38]	0.70 [0.56]
		Pressure Center			3.8 [2.4]	0.25 [0.31]	0.89 [0.61]	2.3	0.38	0.61

*Values shown inside brackets are when at normal position.

SY7120-1D-02
SY7120-1D-02-F1
SY7120-1D-02-F2
SY7120-1D-02F-Q
SY7120-1D-02N
SY7120-1D-02N-F2
SY7120-1D-C8
SY7120-1D-C8-F1
SY7120-1D-C8-F2
SY7120-1D-C10
SY7120-1D-C10-F1
SY7120-1D-C10-F2
SY7120-1D-C10-Q
SY7120-1D-N11
SY7120-1DD-02
SY7120-1DD-02-F1
SY7120-1DD-02-F2
SY7120-1DD-C8
SY7120-1DD-C8-F1

SY7220-1D-02
SY7220-1D-02-F2
SY7220-1D-02-X90
SY7220-1D-02N-F2
SY7220-1D-C8
SY7220-1D-C8-F2
SY7220-1D-C8-F2-X20
SY7220-1D-C10
SY7220-1D-C10-F2
SY7220-1DD-02
SY7220-1DD-02-F2
SY7220-1DD-C8
SY7320-1D-02
SY7320-1D-02-F2
SY7320-1D-02-F2-Q
SY7320-1D-02-Q
SY7320-1D-02F
SY7320-1D-C8
SY7320-1D-C8-F2
SY7320-1D-C10
SY7320-1D-C10-F2
SY7320-1DD-02
SY7320-1DD-02-F2
SY7320-1DD-C8

SY7420-1D-02
SY7420-1D-02-F2
SY7420-1D-C8
SY7420-1D-C8-F2
SY7420-1D-C10
SY7420-1D-C10-F2
SY7420-1DD-02
SY7420-1DD-02-F2
SY7420-1DD-C8
SY7420-1DD-C8-F2
SY7420-1DD-C10
SY7420-1DD-C10-F2
SY7420-1DE-02
SY7420-1DE-02-F2
SY7420-1DE-C8
SY7420-1DE-C8-F2
SY7420-1DE-C10
SY7420-1DE-C10-F2
SY7420-1DO-02

SY7520-1D-02
SY7520-1D-02-F2
SY7520-1D-C8
SY7520-1D-C8-F2
SY7520-1D-C10
SY7520-1D-C10-F2
SY7520-1DD-02
SY7520-1DD-02-F2
SY7520-1DD-C8
SY7520-1DD-C8-F2
SY7520-1DD-C10
SY7520-1DD-C10-F2
SY7520-1DE-02
SY7520-1DE-02-F2
SY7520-1DE-C8
SY7520-1DE-C8-F2
SY7520-1DE-C10
SY7520-1DE-C10-F2
SY7520-1DO-02
SY7520-1DO-02-F2
SY7520-1DO-C8