3-Port Solenoid Valve, Pilot Type, Rubber Seal SYJ500 Series- Van Điện Từ SMC

Download

Rubber Seal 3-Port / Pilot Type SYJ500 Series Specifications- Van Điện Từ SMC

SYJ500 Series body ported type external appearance

SYJ500 Series base mounted type external appearance

*Based on IEC60529.
*1: Based on JIS B 8419:2010 dynamic performance test. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)
*2: Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)

Solenoid Specifications

• *The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
• For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
• For details, see the SMC catalog.

External Pilot Type Specifications

External pilot type (SYJ500R) structure drawing

Type that is separated from the main valve pressure and separately receives pressure from an external pilot valve.
Can be used in a vacuum (up to -100 kPa) and on low-pressure lines of 0.15 MPa or less.

Applicable Models	Base Mounting type (SYJ514R, SYJ524R)
Operating Pressure Range MPa	Main pressure	-100 kPa to 0.7
	External pilot pressure	0.15 to 0.7

• *Please refer to the SMC catalog regarding manifolds.
• *For body ported types, the external pilot type (SYJ3□2R) is a dedicated model for manifolds.